Now set the machine to send data to Cams. On your machine, open this menu and enter the values below.
Menus differ between firmware versions, even on the same model. If you don't see this exact option, look for a similar one such as Cloud Server, ADMS, Web Server or Push Server.
Server IP address152.53.172.248
Server port8123
Enable Domain NameOFF
Proxy serverOFF
HTTPSOFF
Port 8123 is only for this test. After purchase, the machine is moved to port 80.
Machine not online yet? Network check (2 min)
- Connect the network cable and power the machine on.
- Menu → COMM → Ethernet: turn DHCP on, or set IP, subnet, gateway and DNS to match your office network.
- To see your office values on a PC: Start → type cmd → ipconfig /all. The first three parts of the IP must match.
- Back on the home screen, the network icon should show as connected.
Network steps with pictures ↗ · Company firewall blocking it? ↗
Server settings with pictures
Screens for two firmware versions of Cams / ZKTeco menus.
Open the server setup guide ↗
Tick the three checks to start.